Update ws2812_controller.ino

This commit is contained in:
not-matt 2017-12-27 02:03:41 +00:00 committed by GitHub
parent 61f4defaee
commit 24289b61ca
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -1,79 +1,79 @@
#include <Arduino.h> #include <Arduino.h>
#include <ESP8266WiFi.h> #include <ESP8266WiFi.h>
//#include <WebSocketsServer.h> //#include <WebSocketsServer.h>
//#include <Hash.h> //#include <Hash.h>
#include <WiFiUdp.h> #include <WiFiUdp.h>
#include <NeoPixelBus.h> #include <NeoPixelBus.h>
// Set to the number of LEDs in your LED strip // Set to the number of LEDs in your LED strip
#define NUM_LEDS 242 #define NUM_LEDS 242
// Maximum number of packets to hold in the buffer. Don't change this. // Maximum number of packets to hold in the buffer. Don't change this.
#define BUFFER_LEN 726 #define BUFFER_LEN 726
// Toggles FPS output (1 = print FPS over serial, 0 = disable output) // Toggles FPS output (1 = print FPS over serial, 0 = disable output)
#define PRINT_FPS 1 #define PRINT_FPS 1
//NeoPixelBus settings //NeoPixelBus settings
const uint8_t PixelPin = 3; // make sure to set this to the correct pin, ignored for Esp8266(set to 3 by default for DMA) const uint8_t PixelPin = 3; // make sure to set this to the correct pin, ignored for Esp8266(set to 3 by default for DMA)
// Wifi and socket settings // Wifi and socket settings
const char* ssid = "ASUS_VIVOBOOK"; const char* ssid = "YOUR_WIFI_SSID";
const char* password = "T!PT)Psecret"; const char* password = "YOUR_WIFI_PASSWORD";
unsigned int localPort = 7778; unsigned int localPort = 7778;
byte packetBuffer[BUFFER_LEN]; byte packetBuffer[BUFFER_LEN];
RgbColor ledDataBuffer[NUM_LEDS]; RgbColor ledDataBuffer[NUM_LEDS];
// LED strip // LED strip
NeoPixelBus<NeoGrbFeature, Neo800KbpsMethod> ledstrip(NUM_LEDS, PixelPin); NeoPixelBus<NeoGrbFeature, Neo800KbpsMethod> ledstrip(NUM_LEDS, PixelPin);
WiFiUDP port; WiFiUDP port;
// Network information // Network information
// IP must match the IP in config.py // IP must match the IP in config.py
IPAddress ip(192, 168, 137, 200); IPAddress ip(192, 168, 137, 200);
// Set gateway to your router's gateway // Set gateway to your router's gateway
IPAddress gateway(192, 168, 137, 1); IPAddress gateway(192, 168, 137, 1);
IPAddress subnet(255, 255, 255, 0); IPAddress subnet(255, 255, 255, 0);
void setup() { void setup() {
Serial.begin(115200); Serial.begin(115200);
//WiFi.config(ip, gateway, subnet); //WiFi.config(ip, gateway, subnet);
WiFi.mode(WIFI_STA); WiFi.mode(WIFI_STA);
WiFi.begin(ssid, password); WiFi.begin(ssid, password);
Serial.println(""); Serial.println("");
// Connect to wifi and print the IP address over serial // Connect to wifi and print the IP address over serial
while (WiFi.status() != WL_CONNECTED) { while (WiFi.status() != WL_CONNECTED) {
delay(500); delay(500);
Serial.print("."); Serial.print(".");
} }
Serial.println(""); Serial.println("");
Serial.print("Connected to "); Serial.print("Connected to ");
Serial.println(ssid); Serial.println(ssid);
Serial.print("IP address: "); Serial.print("IP address: ");
Serial.println(WiFi.localIP()); Serial.println(WiFi.localIP());
port.begin(localPort); port.begin(localPort);
ledstrip.Begin();//Begin output ledstrip.Begin();//Begin output
ledstrip.Show();//Clear the strip for use ledstrip.Show();//Clear the strip for use
} }
uint8_t N = 0; uint8_t N = 0;
#if PRINT_FPS #if PRINT_FPS
uint16_t fpsCounter = 0; uint16_t fpsCounter = 0;
uint32_t secondTimer = 0; uint32_t secondTimer = 0;
#endif #endif
void loop() { void loop() {
// Read data over socket // Read data over socket
int packetSize = port.parsePacket(); int packetSize = port.parsePacket();
// If packets have been received, interpret the command // If packets have been received, interpret the command
if (packetSize) { if (packetSize) {
int len = port.read(packetBuffer, BUFFER_LEN); int len = port.read(packetBuffer, BUFFER_LEN);
for(int i = 0; i < len; i+=4) { for(int i = 0; i < len; i+=4) {
packetBuffer[len] = 0; packetBuffer[len] = 0;
N = packetBuffer[i]; N = packetBuffer[i];
RgbColor pixel((uint8_t)packetBuffer[i+1], (uint8_t)packetBuffer[i+2], (uint8_t)packetBuffer[i+3]); RgbColor pixel((uint8_t)packetBuffer[i+1], (uint8_t)packetBuffer[i+2], (uint8_t)packetBuffer[i+3]);
ledstrip.SetPixelColor(N, pixel); ledstrip.SetPixelColor(N, pixel);
} }
ledstrip.Show(); ledstrip.Show();
Serial.print("/"); Serial.print("/");
} }
} }