Added experimental support for Raspberry Pi devices
This commit adds support for the Raspberry Pi, which allows users to create a completely standalone music visualization system. The Raspberry Pi should be connected directly to a ws2812b LED strip. A PWM-capable GPIO pin should be connected to the data line of the LED strip. A USB audio input device should be connected to one of the Raspberry Pi's USB ports. It is recommended that the GUI and FPS output be disabled when running the visualization on the Raspberry Pi. These features can degrade performance on the already computationally limited Raspberry Pi.
This commit is contained in:
Scott Lawson
parent
4b6f9a807b
commit
b10a7d0396
@ -3,19 +3,43 @@ from __future__ import print_function
|
||||
from __future__ import division
|
||||
import os
|
||||
|
||||
DEVICE = 'pi'
|
||||
"""Device used to control LED strip. Must be 'pi' or 'esp8266'"""
|
||||
|
||||
if DEVICE == 'esp8266':
|
||||
UDP_IP = '192.168.137.150'
|
||||
"""IP address of the ESP8266. Must match IP in ws2812_controller.ino"""
|
||||
UDP_PORT = 7777
|
||||
"""Port number used for socket communication between Python and ESP8266"""
|
||||
|
||||
if DEVICE == 'pi':
|
||||
LED_PIN = 18
|
||||
"""GPIO pin connected to the LED strip pixels (must support PWM)"""
|
||||
LED_FREQ_HZ = 800000
|
||||
"""LED signal frequency in Hz (usually 800kHz)"""
|
||||
LED_DMA = 5
|
||||
"""DMA channel used for generating PWM signal (try 5)"""
|
||||
BRIGHTNESS = 255
|
||||
"""Brightness of LED strip between 0 and 255"""
|
||||
LED_INVERT = True
|
||||
"""Set True if using an inverting logic level converter"""
|
||||
|
||||
USE_GUI = False
|
||||
"""Whether or not to display a PyQtGraph GUI plot of visualization"""
|
||||
|
||||
DISPLAY_FPS = False
|
||||
"""Whether to display the FPS when running (can reduce performance)"""
|
||||
|
||||
N_PIXELS = 60
|
||||
"""Number of pixels in the LED strip (must match ESP8266 firmware)"""
|
||||
|
||||
GAMMA_TABLE_PATH = os.path.join(os.path.dirname(__file__), 'gamma_table.npy')
|
||||
"""Location of the gamma correction table"""
|
||||
|
||||
UDP_IP = '192.168.137.150'
|
||||
"""IP address of the ESP8266. Must match IP in ws2812_controller.ino"""
|
||||
GAMMA_CORRECTION = True
|
||||
"""Whether to correct LED brightness for nonlinear brightness perception"""
|
||||
|
||||
UDP_PORT = 7777
|
||||
"""Port number used for socket communication between Python and ESP8266"""
|
||||
|
||||
MIC_RATE = 48000
|
||||
MIC_RATE = 44100
|
||||
"""Sampling frequency of the microphone in Hz"""
|
||||
|
||||
FPS = 60
|
||||
@ -43,7 +67,7 @@ MIN_FREQUENCY = 200
|
||||
MAX_FREQUENCY = 12000
|
||||
"""Frequencies above this value will be removed during audio processing"""
|
||||
|
||||
N_FFT_BINS = 30
|
||||
N_FFT_BINS = 15
|
||||
"""Number of frequency bins to use when transforming audio to frequency domain
|
||||
|
||||
Fast Fourier transforms are used to transform time-domain audio data to the
|
||||
@ -58,9 +82,6 @@ number of bins.
|
||||
There is no point using more bins than there are pixels on the LED strip.
|
||||
"""
|
||||
|
||||
GAMMA_CORRECTION = True
|
||||
"""Whether to correct LED brightness for nonlinear brightness perception"""
|
||||
|
||||
N_ROLLING_HISTORY = 2
|
||||
"""Number of past audio frames to include in the rolling window"""
|
||||
|
||||
|
||||
@ -1,27 +1,59 @@
|
||||
from __future__ import print_function
|
||||
from __future__ import division
|
||||
from __future__ import unicode_literals
|
||||
import socket
|
||||
|
||||
import numpy as np
|
||||
import config
|
||||
|
||||
_sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
|
||||
# ESP8266 uses WiFi communication
|
||||
if config.DEVICE == 'esp8266':
|
||||
import socket
|
||||
_sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
|
||||
# Raspberry Pi controls the LED strip directly
|
||||
elif config.DEVICE == 'pi':
|
||||
import neopixel
|
||||
strip = neopixel.Adafruit_NeoPixel(config.N_PIXELS, config.LED_PIN,
|
||||
config.LED_FREQ_HZ, config.LED_DMA,
|
||||
config.LED_INVERT, config.BRIGHTNESS)
|
||||
strip.begin()
|
||||
|
||||
_gamma = np.load(config.GAMMA_TABLE_PATH)
|
||||
"""Gamma lookup table used for nonlinear brightness correction"""
|
||||
|
||||
_prev_pixels = np.tile(253, (3, config.N_PIXELS))
|
||||
"""Pixel values that were most recently displayed on the LED strip"""
|
||||
|
||||
pixels = np.tile(1, (3, config.N_PIXELS))
|
||||
"""Array containing the pixel values for the LED strip"""
|
||||
"""Pixel values for the LED strip"""
|
||||
|
||||
|
||||
def update():
|
||||
def _update_esp8266():
|
||||
"""Sends UDP packets to ESP8266 to update LED strip values
|
||||
|
||||
The ESP8266 will receive and decode the packets to determine what values
|
||||
to display on the LED strip. The communication protocol supports LED strips
|
||||
with a maximum of 256 LEDs.
|
||||
|
||||
The packet encoding scheme is:
|
||||
|i|r|g|b|
|
||||
where
|
||||
i (0 to 255): Index of LED to change (zero-based)
|
||||
r (0 to 255): Red value of LED
|
||||
g (0 to 255): Green value of LED
|
||||
b (0 to 255): Blue value of LED
|
||||
"""
|
||||
global pixels, _prev_pixels
|
||||
pixels = np.clip(pixels, 0, 255).astype(int)
|
||||
# Truncate values and cast to integer
|
||||
pixels = np.clip(pixels, 0, 255).astype(long)
|
||||
# Optionally apply gamma correctio
|
||||
p = _gamma[pixels] if config.GAMMA_CORRECTION else np.copy(pixels)
|
||||
# Send UDP packets when using ESP8266
|
||||
m = []
|
||||
for i in range(config.N_PIXELS):
|
||||
# Ignore pixels if they haven't changed (saves bandwidth)
|
||||
if np.array_equal(p[:, i], _prev_pixels[:, i]):
|
||||
continue
|
||||
# Byte
|
||||
m.append(i) # Index of pixel to change
|
||||
m.append(p[0][i]) # Pixel red value
|
||||
m.append(p[1][i]) # Pixel green value
|
||||
@ -30,6 +62,42 @@ def update():
|
||||
_sock.sendto(bytes(m), (config.UDP_IP, config.UDP_PORT))
|
||||
|
||||
|
||||
def _update_pi():
|
||||
"""Writes new LED values to the Raspberry Pi's LED strip
|
||||
|
||||
Raspberry Pi uses the rpi_ws281x to control the LED strip directly.
|
||||
This function updates the LED strip with new values.
|
||||
"""
|
||||
global pixels, _prev_pixels
|
||||
# Truncate values and cast to integer
|
||||
pixels = np.clip(pixels, 0, 255).astype(long)
|
||||
# Optional gamma correction
|
||||
p = _gamma[pixels] if config.GAMMA_CORRECTION else np.copy(pixels)
|
||||
# Encode 24-bit LED values in 32 bit integers
|
||||
r = np.left_shift(p[0][:].astype(int), 8)
|
||||
g = np.left_shift(p[1][:].astype(int), 16)
|
||||
b = p[2][:].astype(int)
|
||||
rgb = np.bitwise_or(np.bitwise_or(r, g), b)
|
||||
# Update the pixels
|
||||
for i in range(config.N_PIXELS):
|
||||
# Ignore pixels if they haven't changed (saves bandwidth)
|
||||
if np.array_equal(p[:, i], _prev_pixels[:, i]):
|
||||
continue
|
||||
strip._led_data[i] = rgb[i]
|
||||
_prev_pixels = np.copy(p)
|
||||
strip.show()
|
||||
|
||||
|
||||
def update():
|
||||
"""Updates the LED strip values"""
|
||||
if config.DEVICE == 'esp8266':
|
||||
_update_esp8266()
|
||||
elif config.DEVICE == 'pi':
|
||||
_update_pi()
|
||||
else:
|
||||
raise ValueError('Invalid device selected')
|
||||
|
||||
|
||||
# Execute this file to run a LED strand test
|
||||
# If everything is working, you should see a red, green, and blue pixel scroll
|
||||
# across the LED strip continously
|
||||
@ -37,11 +105,11 @@ if __name__ == '__main__':
|
||||
import time
|
||||
# Turn all pixels off
|
||||
pixels *= 0
|
||||
pixels[0, 0] = 255 # Set 1st pixel red
|
||||
pixels[1, 1] = 255 # Set 2nd pixel green
|
||||
pixels[2, 2] = 255 # Set 3rd pixel blue
|
||||
pixels[0, 0] = 255 # Set 1st pixel red
|
||||
pixels[1, 1] = 255 # Set 2nd pixel green
|
||||
pixels[2, 2] = 255 # Set 3rd pixel blue
|
||||
print('Starting LED strand test')
|
||||
while True:
|
||||
pixels = np.roll(pixels, 1, axis=1)
|
||||
update()
|
||||
time.sleep(0.2)
|
||||
time.sleep(0.01)
|
||||
|
||||
@ -7,7 +7,8 @@ import config
|
||||
import microphone
|
||||
import dsp
|
||||
import led
|
||||
import gui
|
||||
if config.USE_GUI:
|
||||
import gui
|
||||
|
||||
_time_prev = time.time() * 1000.0
|
||||
"""The previous time that the frames_per_second() function was called"""
|
||||
@ -68,93 +69,60 @@ def interpolate(y, new_length):
|
||||
|
||||
|
||||
r_filt = dsp.ExpFilter(np.tile(0.01, config.N_PIXELS // 2),
|
||||
alpha_decay=0.08, alpha_rise=0.99)
|
||||
alpha_decay=0.04, alpha_rise=0.4)
|
||||
g_filt = dsp.ExpFilter(np.tile(0.01, config.N_PIXELS // 2),
|
||||
alpha_decay=0.15, alpha_rise=0.99)
|
||||
b_filt = dsp.ExpFilter(np.tile(0.01, config.N_PIXELS // 2),
|
||||
alpha_decay=0.25, alpha_rise=0.99)
|
||||
p_filt = dsp.ExpFilter(np.tile(1, (3, config.N_PIXELS // 2)),
|
||||
alpha_decay=0.05, alpha_rise=0.8)
|
||||
alpha_decay=0.2, alpha_rise=0.99)
|
||||
p = np.tile(1.0, (3, config.N_PIXELS // 2))
|
||||
gain = dsp.ExpFilter(np.tile(0.01, config.N_FFT_BINS),
|
||||
alpha_decay=0.001, alpha_rise=0.99)
|
||||
|
||||
|
||||
def largest_indices(ary, n):
|
||||
"""Returns indices of the n largest values in the given a numpy array"""
|
||||
flat = ary.flatten()
|
||||
indices = np.argpartition(flat, -n)[-n:]
|
||||
indices = indices[np.argsort(-flat[indices])]
|
||||
return np.unravel_index(indices, ary.shape)
|
||||
|
||||
|
||||
def visualize_max(y):
|
||||
"""Experimental sandbox effect. Not recommended for use"""
|
||||
y = np.copy(interpolate(y, config.N_PIXELS // 2)) * 255.0
|
||||
ind = largest_indices(y, 15)
|
||||
y[ind] *= -1.0
|
||||
y[y > 0] = 0.0
|
||||
y[ind] *= -1.0
|
||||
# Blur the color channels with different strengths
|
||||
r = gaussian_filter1d(y, sigma=0.25)
|
||||
g = gaussian_filter1d(y, sigma=0.10)
|
||||
b = gaussian_filter1d(y, sigma=0.00)
|
||||
b = np.roll(b, 1)
|
||||
b[0] = b[1]
|
||||
r_filt.update(r)
|
||||
g_filt.update(g)
|
||||
b_filt.update(b)
|
||||
# Pixel values
|
||||
pixel_r = np.concatenate((r_filt.value[::-1], r_filt.value))
|
||||
pixel_g = np.concatenate((g_filt.value[::-1], g_filt.value))
|
||||
pixel_b = np.concatenate((b_filt.value[::-1], b_filt.value))
|
||||
# Update the LED strip values
|
||||
led.pixels[0, :] = pixel_r
|
||||
led.pixels[1, :] = pixel_g
|
||||
led.pixels[2, :] = pixel_b
|
||||
led.update()
|
||||
# Update the GUI plots
|
||||
GUI.curve[0][0].setData(y=pixel_r)
|
||||
GUI.curve[0][1].setData(y=pixel_g)
|
||||
GUI.curve[0][2].setData(y=pixel_b)
|
||||
|
||||
|
||||
def visualize_scroll(y):
|
||||
"""Effect that originates in the center and scrolls outwards"""
|
||||
global p
|
||||
y = gaussian_filter1d(y, sigma=1.0)**3.0
|
||||
y = np.copy(y)
|
||||
y = np.copy(y)**1.0
|
||||
gain.update(y)
|
||||
y /= gain.value
|
||||
y *= 255.0
|
||||
r = int(max(y[:len(y) // 3]))
|
||||
g = int(max(y[len(y) // 3: 2 * len(y) // 3]))
|
||||
b = int(max(y[2 * len(y) // 3:]))
|
||||
# Scrolling effect window
|
||||
p = np.roll(p, 1, axis=1)
|
||||
p *= 0.98
|
||||
p = gaussian_filter1d(p, sigma=0.2)
|
||||
# p = gaussian_filter1d(p, sigma=0.2)
|
||||
# Create new color originating at the center
|
||||
p[0, 0] = r
|
||||
p[1, 0] = g
|
||||
p[2, 0] = b
|
||||
# Update the LED strip
|
||||
led.pixels = np.concatenate((p[:, ::-1], p), axis=1)
|
||||
led.update()
|
||||
# Update the GUI plots
|
||||
GUI.curve[0][0].setData(y=np.concatenate((p[0, :][::-1], p[0, :])))
|
||||
GUI.curve[0][1].setData(y=np.concatenate((p[1, :][::-1], p[1, :])))
|
||||
GUI.curve[0][2].setData(y=np.concatenate((p[2, :][::-1], p[2, :])))
|
||||
if config.USE_GUI:
|
||||
# Update the GUI plots
|
||||
GUI.curve[0][0].setData(y=np.concatenate((p[0, :][::-1], p[0, :])))
|
||||
GUI.curve[0][1].setData(y=np.concatenate((p[1, :][::-1], p[1, :])))
|
||||
GUI.curve[0][2].setData(y=np.concatenate((p[2, :][::-1], p[2, :])))
|
||||
|
||||
|
||||
def visualize_energy(y):
|
||||
"""Effect that expands from the center with increasing sound energy"""
|
||||
global p
|
||||
y = gaussian_filter1d(y, sigma=1.0)**3.0
|
||||
y = np.copy(y)**2.0
|
||||
gain.update(y)
|
||||
y /= gain.value
|
||||
y *= (config.N_PIXELS // 2) - 1
|
||||
r = int(np.mean(y[:len(y) // 3]))
|
||||
g = int(np.mean(y[len(y) // 3: 2 * len(y) // 3]))
|
||||
b = int(np.mean(y[2 * len(y) // 3:]))
|
||||
# Scale by the width of the LED strip
|
||||
y *= float((config.N_PIXELS // 2) - 1)
|
||||
# Map color channels according to energy in the different freq bands
|
||||
scale = 0.9
|
||||
r = int(np.mean(y[:len(y) // 3]**scale))
|
||||
g = int(np.mean(y[len(y) // 3: 2 * len(y) // 3]**scale))
|
||||
b = int(np.mean(y[2 * len(y) // 3:]**scale))
|
||||
# Assign color to different frequency regions
|
||||
p[0, :r] = 255.0
|
||||
p[0, r:] = 0.0
|
||||
p[1, :g] = 255.0
|
||||
@ -163,41 +131,45 @@ def visualize_energy(y):
|
||||
p[2, b:] = 0.0
|
||||
p_filt.update(p)
|
||||
p = np.round(p_filt.value)
|
||||
# Apply substantial blur to smooth the edges
|
||||
p[0, :] = gaussian_filter1d(p[0, :], sigma=4.0)
|
||||
p[1, :] = gaussian_filter1d(p[1, :], sigma=4.0)
|
||||
p[2, :] = gaussian_filter1d(p[2, :], sigma=4.0)
|
||||
# Update LED pixel arrays
|
||||
# Set the new pixel value
|
||||
led.pixels = np.concatenate((p[:, ::-1], p), axis=1)
|
||||
led.update()
|
||||
# Update the GUI plots
|
||||
GUI.curve[0][0].setData(y=np.concatenate((p[0, :][::-1], p[0, :])))
|
||||
GUI.curve[0][1].setData(y=np.concatenate((p[1, :][::-1], p[1, :])))
|
||||
GUI.curve[0][2].setData(y=np.concatenate((p[2, :][::-1], p[2, :])))
|
||||
if config.USE_GUI:
|
||||
# Update the GUI plots
|
||||
GUI.curve[0][0].setData(y=np.concatenate((p[0, :][::-1], p[0, :])))
|
||||
GUI.curve[0][1].setData(y=np.concatenate((p[1, :][::-1], p[1, :])))
|
||||
GUI.curve[0][2].setData(y=np.concatenate((p[2, :][::-1], p[2, :])))
|
||||
|
||||
|
||||
def visualize_spectrum(y):
|
||||
"""Effect that maps the Mel filterbank frequencies onto the LED strip"""
|
||||
y = np.copy(interpolate(y, config.N_PIXELS // 2)) * 255.0
|
||||
y = np.copy(interpolate(y, config.N_PIXELS // 2))
|
||||
# Blur the color channels with different strengths
|
||||
r = gaussian_filter1d(y, sigma=0.25)
|
||||
g = gaussian_filter1d(y, sigma=0.10)
|
||||
b = gaussian_filter1d(y, sigma=0.00)
|
||||
r = gaussian_filter1d(y, sigma=1., order=0)
|
||||
g = gaussian_filter1d(y, sigma=1., order=0)
|
||||
b = gaussian_filter1d(y, sigma=1., order=0)
|
||||
# Update temporal filters
|
||||
r_filt.update(r)
|
||||
g_filt.update(g)
|
||||
b_filt.update(b)
|
||||
# Pixel values
|
||||
pixel_r = np.concatenate((r_filt.value[::-1], r_filt.value))
|
||||
pixel_g = np.concatenate((g_filt.value[::-1], g_filt.value))
|
||||
pixel_b = np.concatenate((b_filt.value[::-1], b_filt.value))
|
||||
pixel_r = np.concatenate((r_filt.value[::-1], r_filt.value)) * 255.0
|
||||
pixel_g = np.concatenate((g_filt.value[::-1], g_filt.value)) * 255.0
|
||||
pixel_b = np.concatenate((b_filt.value[::-1], b_filt.value)) * 255.0
|
||||
# Update the LED strip values
|
||||
led.pixels[0, :] = pixel_r
|
||||
led.pixels[1, :] = pixel_g
|
||||
led.pixels[2, :] = pixel_b
|
||||
led.update()
|
||||
# Update the GUI plots
|
||||
GUI.curve[0][0].setData(y=pixel_r)
|
||||
GUI.curve[0][1].setData(y=pixel_g)
|
||||
GUI.curve[0][2].setData(y=pixel_b)
|
||||
if config.USE_GUI:
|
||||
# Update the GUI plots
|
||||
GUI.curve[0][0].setData(y=pixel_r)
|
||||
GUI.curve[0][1].setData(y=pixel_g)
|
||||
GUI.curve[0][2].setData(y=pixel_b)
|
||||
|
||||
|
||||
mel_gain = dsp.ExpFilter(np.tile(1e-1, config.N_FFT_BINS),
|
||||
@ -205,12 +177,22 @@ mel_gain = dsp.ExpFilter(np.tile(1e-1, config.N_FFT_BINS),
|
||||
volume = dsp.ExpFilter(config.MIN_VOLUME_THRESHOLD,
|
||||
alpha_decay=0.02, alpha_rise=0.02)
|
||||
|
||||
# Keeps track of the number of buffer overflows
|
||||
# Lots of buffer overflows could mean that FPS is set too high
|
||||
buffer_overflows = 1
|
||||
|
||||
def microphone_update(stream):
|
||||
global y_roll, prev_rms, prev_exp
|
||||
# Retrieve and normalize the new audio samples
|
||||
y = np.fromstring(stream.read(samples_per_frame,
|
||||
exception_on_overflow=False), dtype=np.int16)
|
||||
try:
|
||||
y = np.fromstring(stream.read(samples_per_frame), dtype=np.int16)
|
||||
# exception_on_overflow=False), dtype=np.int16)
|
||||
except IOError:
|
||||
y = y_roll[config.N_ROLLING_HISTORY - 1, :]
|
||||
global buffer_overflows
|
||||
print('Buffer overflows: {0}'.format(buffer_overflows))
|
||||
buffer_overflows += 1
|
||||
# Normalize samples between 0 and 1
|
||||
y = y / 2.0**15
|
||||
# Construct a rolling window of audio samples
|
||||
y_roll = np.roll(y_roll, -1, axis=0)
|
||||
@ -239,8 +221,10 @@ def microphone_update(stream):
|
||||
mel = mel / mel_gain.value
|
||||
# Visualize the filterbank output
|
||||
visualization_effect(mel)
|
||||
GUI.app.processEvents()
|
||||
print('FPS {:.0f} / {:.0f}'.format(frames_per_second(), config.FPS))
|
||||
if config.USE_GUI:
|
||||
GUI.app.processEvents()
|
||||
if config.DISPLAY_FPS:
|
||||
print('FPS {:.0f} / {:.0f}'.format(frames_per_second(), config.FPS))
|
||||
|
||||
|
||||
# Number of audio samples to read every time frame
|
||||
@ -249,37 +233,38 @@ samples_per_frame = int(config.MIC_RATE / config.FPS)
|
||||
# Array containing the rolling audio sample window
|
||||
y_roll = np.random.rand(config.N_ROLLING_HISTORY, samples_per_frame) / 1e16
|
||||
|
||||
visualization_effect = visualize_spectrum
|
||||
visualization_effect = visualize_energy
|
||||
"""Visualization effect to display on the LED strip"""
|
||||
|
||||
if __name__ == '__main__':
|
||||
import pyqtgraph as pg
|
||||
# Create GUI plot for visualizing LED strip output
|
||||
GUI = gui.GUI(width=800, height=400, title='Audio Visualization')
|
||||
GUI.add_plot('Color Channels')
|
||||
r_pen = pg.mkPen((255, 30, 30, 200), width=6)
|
||||
g_pen = pg.mkPen((30, 255, 30, 200), width=6)
|
||||
b_pen = pg.mkPen((30, 30, 255, 200), width=6)
|
||||
GUI.add_curve(plot_index=0, pen=r_pen)
|
||||
GUI.add_curve(plot_index=0, pen=g_pen)
|
||||
GUI.add_curve(plot_index=0, pen=b_pen)
|
||||
GUI.plot[0].setRange(xRange=(0, config.N_PIXELS), yRange=(-5, 275))
|
||||
GUI.curve[0][0].setData(x=range(config.N_PIXELS))
|
||||
GUI.curve[0][1].setData(x=range(config.N_PIXELS))
|
||||
GUI.curve[0][2].setData(x=range(config.N_PIXELS))
|
||||
# Add ComboBox for effect selection
|
||||
effect_list = {
|
||||
'Scroll effect' : visualize_scroll,
|
||||
'Spectrum effect' : visualize_spectrum,
|
||||
'Energy effect' : visualize_energy
|
||||
}
|
||||
effect_combobox = pg.ComboBox(items=effect_list)
|
||||
def effect_change():
|
||||
global visualization_effect
|
||||
visualization_effect = effect_combobox.value()
|
||||
effect_combobox.setValue(visualization_effect)
|
||||
effect_combobox.currentIndexChanged.connect(effect_change)
|
||||
GUI.layout.addWidget(effect_combobox)
|
||||
if config.USE_GUI:
|
||||
import pyqtgraph as pg
|
||||
# Create GUI plot for visualizing LED strip output
|
||||
GUI = gui.GUI(width=800, height=400, title='Audio Visualization')
|
||||
GUI.add_plot('Color Channels')
|
||||
r_pen = pg.mkPen((255, 30, 30, 200), width=6)
|
||||
g_pen = pg.mkPen((30, 255, 30, 200), width=6)
|
||||
b_pen = pg.mkPen((30, 30, 255, 200), width=6)
|
||||
GUI.add_curve(plot_index=0, pen=r_pen)
|
||||
GUI.add_curve(plot_index=0, pen=g_pen)
|
||||
GUI.add_curve(plot_index=0, pen=b_pen)
|
||||
GUI.plot[0].setRange(xRange=(0, config.N_PIXELS), yRange=(-5, 275))
|
||||
GUI.curve[0][0].setData(x=range(config.N_PIXELS))
|
||||
GUI.curve[0][1].setData(x=range(config.N_PIXELS))
|
||||
GUI.curve[0][2].setData(x=range(config.N_PIXELS))
|
||||
# Add ComboBox for effect selection
|
||||
effect_list = {
|
||||
'Scroll effect' : visualize_scroll,
|
||||
'Spectrum effect' : visualize_spectrum,
|
||||
'Energy effect' : visualize_energy
|
||||
}
|
||||
effect_combobox = pg.ComboBox(items=effect_list)
|
||||
def effect_change():
|
||||
global visualization_effect
|
||||
visualization_effect = effect_combobox.value()
|
||||
effect_combobox.setValue(visualization_effect)
|
||||
effect_combobox.currentIndexChanged.connect(effect_change)
|
||||
GUI.layout.addWidget(effect_combobox)
|
||||
# Initialize LEDs
|
||||
led.update()
|
||||
# Start listening to live audio stream
|
||||
|
||||
Loading…
Reference in New Issue
Block a user