Gurkengewuerz/audio-reactive-led-strip
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Added more information about hardware connections to the README

Browse Source
This commit is contained in:
Scott Lawson 2016-12-27 21:37:36 -07:00
parent f34b0e49fa
commit 1f17f3584d
1 changed files with 4 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
README.md
View File

@ -77,14 +77,15 @@ For the NodeMCU v3 and Adafruit Feather HUZZAH, the location of the RX1 pin is s
1. Install Python and Python dependencies
2. [Install Arduino IDE and ESP8266 addon](https://learn.sparkfun.com/tutorials/esp8266-thing-hookup-guide/installing-the-esp8266-arduino-addon)
3. Download and extract all of the files in this repository onto your computer
4. In [ws2812_controller.ino](arduino/ws2812_controller/ws2812_controller.ino):
4. Connect the RX1 pin of your ESP8266 module to the data input pin of the ws2812b LED strip. Ensure that your LED strip is properly connected to a 5V power supply and that the ESP8266 and LED strip share a common electrical ground connection.
5. In [ws2812_controller.ino](arduino/ws2812_controller/ws2812_controller.ino):
- Set `const char* ssid` to your router's SSID
- Set `const char* password` to your router's password
- Set `IPAddress gateway` to match your router's gateway
- Set `IPAddress ip` to the IP address that you would like your ESP8266 to use (your choice)
- Set `#define NUM_LEDS` to the number of LEDs in your LED strip
5. Upload the [ws2812_controller.ino](arduino/ws2812_controller/ws2812_controller.ino) firmware to the ESP8266. Ensure that you have selected the correct ESP8266 board from the boards menu. In the dropdown menu, set `CPU Frequency` to 160 MHz for optimal performance.
6. In [config.py](python/config.py):
6. Upload the [ws2812_controller.ino](arduino/ws2812_controller/ws2812_controller.ino) firmware to the ESP8266. Ensure that you have selected the correct ESP8266 board from the boards menu. In the dropdown menu, set `CPU Frequency` to 160 MHz for optimal performance.
7. In [config.py](python/config.py):
- Set `N_PIXELS` to the number of LEDs in your LED strip (must match `NUM_LEDS` in [ws2812_controller.ino](arduino/ws2812_controller/ws2812_controller.ino))
- Set `UDP_IP` to the IP address of your ESP8266 (must match `ip` in [ws2812_controller.ino](arduino/ws2812_controller/ws2812_controller.ino))
- If needed, set `MIC_RATE` to your microphone sampling rate in Hz. Most of the time you will not need to change this.