Gurkengewuerz/audio-reactive-led-strip
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

changes for raspberry pi 3

Browse Source
This commit is contained in:
Niklas 2019-02-20 14:51:19 +00:00
parent a2fa8df006
commit 0ba74fd6ed
5 changed files with 26 additions and 97 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

92
python/lib/config.py
View File

@ -12,7 +12,7 @@ use_defaults = {"configuration": True, # See notes bel
settings = { # All settings are stored in this dict
"configuration":{ # Program configuration
'USE_GUI': True, # Whether to display the GUI
'USE_GUI': False, # Whether to display the GUI
'DISPLAY_FPS': False, # Whether to print the FPS when running (can reduce performance)
'MIC_RATE': 48000, # Sampling frequency of the microphone in Hz
'FPS': 60, # Desired refresh rate of the visualization (frames per second)
@ -32,17 +32,17 @@ settings = { # All settings
# All devices and their respective settings. Indexed by name, call each one what you want.
"devices":{"Desk Strip":{
"configuration":{"TYPE": "ESP8266", # Device type (see below for all supported boards)
"configuration":{"TYPE": "RaspberryPi", # Device type (see below for all supported boards)
# Required configuration for device. See below for all required keys per device
"AUTO_DETECT": True, # Set this true if you're using windows hotspot to connect (see below for more info)
"MAC_ADDR": "2c-3a-e8-2f-2c-9f", # MAC address of the ESP8266. Only used if AUTO_DETECT is True
"UDP_IP": "192.168.1.208", # IP address of the ESP8266. Must match IP in ws2812_controller.ino
"UDP_PORT": 7778, # Port number used for socket communication between Python and ESP8266
"LED_INVERT": False, # Set this true if you're using windows hotspot to connect (see below for more info)
"LED_PIN": 18, # MAC address of the ESP8266. Only used if AUTO_DETECT is True
"LED_FREQ_HZ": 800000, # IP address of the ESP8266. Must match IP in ws2812_controller.ino
"LED_DMA": 5, # Port number used for socket communication between Python and ESP8266
"MAX_BRIGHTNESS": 250, # Max brightness of output (0-255) (my strip sometimes bugs out with high brightness)
# Other configuration
"N_PIXELS": 58, # Number of pixels in the LED strip (must match ESP8266 firmware)
"N_PIXELS": 150, # Number of pixels in the LED strip (must match ESP8266 firmware)
"N_FFT_BINS": 24, # Number of frequency bins to use when transforming audio to frequency domain
"current_effect": "Energy" # Currently selected effect for this board, used as default when program launches
"current_effect": "Power" # Currently selected effect for this board, used as default when program launches
},
# Configurable options for this board's effects go in this dictionary.
@ -77,79 +77,7 @@ settings = { # All settings
"b_multiplier": 1.0, # How much blue
"blur": 0.2}, # Amount of blur to apply
"Power": {"color_mode": "Spectral", # Colour gradient to display
"s_count": 20, # Initial number of sparks
"s_color": "White", # Color of sparks
"mirror": True, # Mirror output down central axis
"flip_lr":False}, # Flip output left-right
"Single": {"color": "Purple"}, # Static color to show
"Beat": {"color": "Red", # Colour of beat flash
"decay": 0.7}, # How quickly the flash fades away
"Bars": {"resolution":4, # Number of "bars"
"color_mode":"Spectral", # Multicolour mode to use
"roll_speed":0, # How fast (if at all) to cycle colour colours across strip
"mirror": False, # Mirror down centre of strip
#"reverse_grad": False, # Flip (LR) gradient
"reverse_roll": False, # Reverse movement of gradient roll
"flip_lr":False}, # Flip output left-right
"Gradient": {"color_mode":"Spectral", # Colour gradient to display
"roll_speed": 0, # How fast (if at all) to cycle colour colours across strip
"mirror": False, # Mirror gradient down central axis
"reverse": False}, # Reverse movement of gradient
"Fade": {"color_mode":"Spectral", # Colour gradient to fade through
"roll_speed": 1, # How fast (if at all) to fade through colours
"reverse": False}, # Reverse "direction" of fade (r->g->b or r<-g<-b)
"Calibration":{"r": 100,
"g": 100,
"b": 100}
}
},
"Main Strip":{
"configuration":{"TYPE": "ESP8266", # Device type (see below for all supported boards)
# Required configuration for device. See below for all required keys per device
"AUTO_DETECT": True, # Set this true if you're using windows hotspot to connect (see below for more info)
"MAC_ADDR": "5c-cf-7f-f0-8c-f3", # MAC address of the ESP8266. Only used if AUTO_DETECT is True
"UDP_IP": "192.168.1.208", # IP address of the ESP8266. Must match IP in ws2812_controller.ino
"UDP_PORT": 7778, # Port number used for socket communication between Python and ESP8266
"MAX_BRIGHTNESS": 180, # Max brightness of output (0-255) (my strip sometimes bugs out with high brightness)
# Other configuration
"N_PIXELS": 226, # Number of pixels in the LED strip (must match ESP8266 firmware)
"N_FFT_BINS": 24, # Number of frequency bins to use when transforming audio to frequency domain
"current_effect": "Single" # Currently selected effect for this board, used as default when program launches
},
# Configurable options for this board's effects go in this dictionary.
# Usage: config.settings["devices"][name]["effect_opts"][effect][option]
"effect_opts":{"Energy": {"blur": 1, # Amount of blur to apply
"scale":0.9, # Width of effect on strip
"r_multiplier": 1.0, # How much red
"g_multiplier": 1.0, # How much green
"b_multiplier": 1.0}, # How much blue
"Wave": {"color_wave": "Red", # Colour of moving bit
"color_flash": "White", # Colour of flashy bit
"wipe_len":5, # Initial length of colour bit after beat
"decay": 0.7, # How quickly the flash fades away
"wipe_speed":2}, # Number of pixels added to colour bit every frame
"Spectrum": {"r_multiplier": 1.0, # How much red
"g_multiplier": 1.0, # How much green
"b_multiplier": 1.0}, # How much blue
"Wavelength":{"roll_speed": 0, # How fast (if at all) to cycle colour overlay across strip
"color_mode": "Spectral", # Colour gradient to display
"mirror": False, # Reflect output down centre of strip
"reverse_grad": False, # Flip (LR) gradient
"reverse_roll": False, # Reverse movement of gradient roll
"blur": 3.0, # Amount of blur to apply
"flip_lr":False}, # Flip output left-right
"Scroll": {"lows_color": "Red", # Colour of low frequencies
"mids_color": "Green", # Colour of mid frequencies
"high_color": "Blue", # Colour of high frequencies
"decay": 0.995, # How quickly the colour fades away as it moves
"speed": 1, # Speed of scroll
"r_multiplier": 1.0, # How much red
"g_multiplier": 1.0, # How much green
"b_multiplier": 1.0, # How much blue
"blur": 0.2}, # Amount of blur to apply
"Power": {"color_mode": "Spectral", # Colour gradient to display
"s_count": 20, # Initial number of sparks
"s_count": 0, # Initial number of sparks
"s_color": "White", # Color of sparks
"mirror": True, # Mirror output down central axis
"flip_lr":False}, # Flip output left-right
@ -360,7 +288,7 @@ for board in settings["devices"]:
settings["devices"][board]["configuration"]["SOFTWARE_GAMMA_CORRECTION"] = False
else:
raise ValueError("Invalid device selected. Device {} not known.".format(settings["devices"][board]["configuration"]["TYPE"]))
settings["devices"][board]["effect_opts"]["Power"]["s_count"] = settings["devices"][board]["configuration"]["N_PIXELS"]//6
#settings["devices"][board]["effect_opts"]["Power"]["s_count"] = settings["devices"][board]["configuration"]["N_PIXELS"]//6
# Cheeky lil fix in case the user sets an odd number of LEDs
if settings["devices"][board]["configuration"]["N_PIXELS"] % 2:
settings["devices"][board]["configuration"]["N_PIXELS"] -= 1

2
python/lib/devices.py
View File

@ -255,7 +255,7 @@ class RaspberryPi(LEDController):
rgb = np.bitwise_or(np.bitwise_or(r, g), b)
# Update the pixels
for i in range(n_pixels):
self.strip._led_data[i] = rgb[i]
self.strip._led_data[i] = int(rgb[i])
self.strip.show()

3
python/lib/microphone.py
View File

@ -16,8 +16,9 @@ def start_stream(callback):
prev_ovf_time = time.time()
while True:
try:
y = np.fromstring(stream.read(frames_per_buffer), dtype=np.int16)
y = np.fromstring(stream.read(frames_per_buffer, exception_on_overflow=False), dtype=np.int16)
y = y.astype(np.float32)
stream.read(stream.get_read_available(), exception_on_overflow=False)
callback(y)
except IOError:
overflows += 1

6
python/lib/settings.ini
View File

File diff suppressed because one or more lines are too long

8
python/main.py
View File

@ -13,7 +13,7 @@ import lib.melbank as melbank
import lib.devices as devices
import random
from PyQt5.QtCore import QSettings
if config.settings["configuration"]["USE_GUI"]:
#if config.settings["configuration"]["USE_GUI"]:
from lib.qrangeslider import QRangeSlider
from lib.qfloatslider import QFloatSlider
import pyqtgraph as pg
@ -1332,7 +1332,7 @@ def microphone_update(audio_samples):
# Visualization for each board
for board in boards:
# Get visualization output for each board
audio_input = audio_datas[board]["vol"] > config.settings["configuration"]["MIN_VOLUME_THRESHOLD"]
audio_input = (audio_datas[board]["vol"]) > (config.settings["configuration"]["MIN_VOLUME_THRESHOLD"])
outputs[board] = visualizers[board].get_vis(audio_datas[board]["mel"], audio_input)
# Map filterbank output onto LED strip(s)
boards[board].show(outputs[board])
@ -1359,8 +1359,8 @@ def microphone_update(audio_samples):
app.processEvents()
# Left in just in case prople dont use the gui
elif vol < config.settings["configuration"]["MIN_VOLUME_THRESHOLD"]:
print("No audio input. Volume below threshold. Volume: {}".format(vol))
elif audio_datas[board]["vol"] < config.settings["configuration"]["MIN_VOLUME_THRESHOLD"]:
print("No audio input. Volume below threshold. Volume: {}".format(audio_datas[board]["vol"]))
if config.settings["configuration"]["DISPLAY_FPS"]:
print('FPS {:.0f} / {:.0f}'.format(fps, config.settings["configuration"]["FPS"]))