audio-reactive-led-strip/python/visualization.py

from __future__ import print_function
from __future__ import division
import time
import numpy as np
from scipy.ndimage.filters import gaussian_filter1d
import config
import microphone
import dsp
import led
import gui

_time_prev = time.time() * 1000.0
"""The previous time that the frames_per_second() function was called"""

_fps = dsp.ExpFilter(val=config.FPS, alpha_decay=0.002, alpha_rise=0.002)
"""The low-pass filter used to estimate frames-per-second"""


def frames_per_second():
    """Return the estimated frames per second

    Returns the current estimate for frames-per-second (FPS).
    FPS is estimated by measured the amount of time that has elapsed since
    this function was previously called. The FPS estimate is low-pass filtered
    to reduce noise.

    This function is intended to be called one time for every iteration of
    the program's main loop.

    Returns
    -------
    fps : float
        Estimated frames-per-second. This value is low-pass filtered
        to reduce noise.
    """
    global _time_prev, _fps
    time_now = time.time() * 1000.0
    dt = time_now - _time_prev
    _time_prev = time_now
    if dt == 0.0:
        return _fps.value
    return _fps.update(1000.0 / dt)


def interpolate(y, new_length):
    """Intelligently resizes the array by linearly interpolating the values

    Parameters
    ----------
    y : np.array
        Array that should be resized

    new_length : int
        The length of the new interpolated array

    Returns
    -------
    z : np.array
        New array with length of new_length that contains the interpolated
        values of y.
    """
    if len(y) == new_length:
        return y
    x_old = np.linspace(0, 1, len(y))
    x_new = np.linspace(0, 1, new_length)
    z = np.interp(x_new, x_old, y)
    return z


r_filt = dsp.ExpFilter(np.tile(0.01, config.N_PIXELS // 2),
                       alpha_decay=0.08, alpha_rise=0.99)
g_filt = dsp.ExpFilter(np.tile(0.01, config.N_PIXELS // 2),
                       alpha_decay=0.15, alpha_rise=0.99)
b_filt = dsp.ExpFilter(np.tile(0.01, config.N_PIXELS // 2),
                       alpha_decay=0.25, alpha_rise=0.99)
p_filt = dsp.ExpFilter(np.tile(1, (3, config.N_PIXELS // 2)),
                       alpha_decay=0.05, alpha_rise=0.8)
p = np.tile(1, (3, config.N_PIXELS // 2))
gain = dsp.ExpFilter(np.tile(0.01, config.N_FFT_BINS),
                     alpha_decay=0.001, alpha_rise=0.99)


def largest_indices(ary, n):
    """Returns the n largest indices from a numpy array."""
    flat = ary.flatten()
    indices = np.argpartition(flat, -n)[-n:]
    indices = indices[np.argsort(-flat[indices])]
    return np.unravel_index(indices, ary.shape)


def visualize_max(y):
    y = np.copy(interpolate(y, config.N_PIXELS // 2)) * 255.0
    ind = largest_indices(y, 15)
    y[ind] *= -1
    y[y > 0] = 0
    y[ind] *= -1
    # Blur the color channels with different strengths
    r = gaussian_filter1d(y, sigma=0.25)
    g = gaussian_filter1d(y, sigma=0.10)
    b = gaussian_filter1d(y, sigma=0.00)
    b = np.roll(b, 1)
    b[0] = b[1]
    r_filt.update(r)
    g_filt.update(g)
    b_filt.update(b)
    # Pixel values
    pixel_r = np.concatenate((r_filt.value[::-1], r_filt.value))
    pixel_g = np.concatenate((g_filt.value[::-1], g_filt.value))
    pixel_b = np.concatenate((b_filt.value[::-1], b_filt.value))
    # Update the LED strip values
    led.pixels[0, :] = pixel_r
    led.pixels[1, :] = pixel_g
    led.pixels[2, :] = pixel_b
    # Update the GUI plots
    GUI.curve[0][0].setData(y=pixel_r)
    GUI.curve[0][1].setData(y=pixel_g)
    GUI.curve[0][2].setData(y=pixel_b)
    led.update()


def visualize_scroll(y):
    global p
    y = gaussian_filter1d(y, sigma=1.0)**3.0
    y = np.copy(y)
    gain.update(y)
    y /= gain.value
    y *= 255.0
    r = int(max(y[:len(y) // 3]))
    g = int(max(y[len(y) // 3: 2 * len(y) // 3]))
    b = int(max(y[2 * len(y) // 3:]))
    p = np.roll(p, 1, axis=1)
    p *= 0.98
    p = gaussian_filter1d(p, sigma=0.2)
    p[0, 0] = r
    p[1, 0] = g
    p[2, 0] = b
    led.pixels = np.concatenate((p[:, ::-1], p), axis=1)
    led.update()


def visualize_energy(y):
    global p
    y = gaussian_filter1d(y, sigma=1.0)**3.0
    gain.update(y)
    y /= gain.value
    y *= (config.N_PIXELS // 2) - 1
    r = int(np.mean(y[:len(y) // 3]))
    g = int(np.mean(y[len(y) // 3: 2 * len(y) // 3]))
    b = int(np.mean(y[2 * len(y) // 3:]))
    p[0, :r] = 255
    p[0, r:] = 0
    p[1, :g] = 255
    p[1, g:] = 0
    p[2, :b] = 255
    p[2, b:] = 0
    p_filt.update(p)
    p = p_filt.value.astype(int)
    p[0, :] = gaussian_filter1d(p[0, :], sigma=4.0)
    p[1, :] = gaussian_filter1d(p[1, :], sigma=4.0)
    p[2, :] = gaussian_filter1d(p[2, :], sigma=4.0)
    led.pixels = np.concatenate((p[:, ::-1], p), axis=1)
    led.update()


def visualize_spectrum(y):
    y = np.copy(interpolate(y, config.N_PIXELS // 2)) * 255.0
    # Blur the color channels with different strengths
    r = gaussian_filter1d(y, sigma=0.25)
    g = gaussian_filter1d(y, sigma=0.10)
    b = gaussian_filter1d(y, sigma=0.00)
    r_filt.update(r)
    g_filt.update(g)
    b_filt.update(b)
    # Pixel values
    pixel_r = np.concatenate((r_filt.value[::-1], r_filt.value))
    pixel_g = np.concatenate((g_filt.value[::-1], g_filt.value))
    pixel_b = np.concatenate((b_filt.value[::-1], b_filt.value))
    # Update the LED strip values
    led.pixels[0, :] = pixel_r
    led.pixels[1, :] = pixel_g
    led.pixels[2, :] = pixel_b
    # Update the GUI plots
    GUI.curve[0][0].setData(y=pixel_r)
    GUI.curve[0][1].setData(y=pixel_g)
    GUI.curve[0][2].setData(y=pixel_b)
    led.update()


mel_gain = dsp.ExpFilter(np.tile(1e-1, config.N_FFT_BINS),
                         alpha_decay=0.01, alpha_rise=0.99)
volume = dsp.ExpFilter(config.MIN_VOLUME_THRESHOLD,
                       alpha_decay=0.02, alpha_rise=0.02)


def microphone_update(stream):
    global y_roll, prev_rms, prev_exp
    # Normalize new audio samples
    y = np.fromstring(stream.read(samples_per_frame,
                                  exception_on_overflow=False), dtype=np.int16)
    y = y / 2.0**15
    # Construct a rolling window of audio samples
    y_roll = np.roll(y_roll, -1, axis=0)
    y_roll[-1, :] = np.copy(y)
    y_data = np.concatenate(y_roll, axis=0)
    volume.update(np.nanmean(y_data ** 2))

    if volume.value < config.MIN_VOLUME_THRESHOLD:
        print('No audio input. Volume below threshold. Volume:', volume.value)
        led.pixels = np.tile(0, (3, config.N_PIXELS))
        led.update()
    else:
        XS, YS = dsp.fft(y_data, window=np.hamming)
        YS = YS[:len(YS) // 2]
        XS = XS[:len(XS) // 2]
        YS = np.atleast_2d(np.abs(YS)).T * dsp.mel_y.T
        YS = np.sum(YS, axis=0)**2.0
        mel = YS**0.5
        mel = gaussian_filter1d(mel, sigma=1.0)
        mel_gain.update(np.max(mel))
        mel = mel / mel_gain.value
        visualize_spectrum(mel)
        # visualize_max(mel)
        # visualize_scroll(mel)
        # visualize_energy(mel)
    GUI.app.processEvents()
    print('FPS {:.0f} / {:.0f}'.format(frames_per_second(), config.FPS))


# Number of audio samples to read every time frame
samples_per_frame = int(config.MIC_RATE / config.FPS)

# Array containing the rolling audio sample window
y_roll = np.random.rand(config.N_ROLLING_HISTORY, samples_per_frame) / 1e16


if __name__ == '__main__':
    import pyqtgraph as pg
    GUI = gui.GUI(width=800, height=400, title='Audio Visualization')
    # Audio plot
    GUI.add_plot('Color Channels')
    r_pen = pg.mkPen((255, 30, 30, 200), width=6)
    g_pen = pg.mkPen((30, 255, 30, 200), width=6)
    b_pen = pg.mkPen((30, 30, 255, 200), width=6)
    GUI.add_curve(plot_index=0, pen=r_pen)
    GUI.add_curve(plot_index=0, pen=g_pen)
    GUI.add_curve(plot_index=0, pen=b_pen)
    GUI.plot[0].setRange(xRange=(0, config.N_PIXELS), yRange=(-5, 275))
    GUI.curve[0][0].setData(x=range(config.N_PIXELS))
    GUI.curve[0][1].setData(x=range(config.N_PIXELS))
    GUI.curve[0][2].setData(x=range(config.N_PIXELS))
    # Initialize LEDs
    led.update()
    # Start listening to live audio stream
    microphone.start_stream(microphone_update)